Home > IP-600
IP Network Audio Decoder IP-600NA
IP-600NA is one IP based audio decoder, which could be remotedly controlled by software, is used to decoder IP network audio signal into analog audio signal.
Product Details

Description:

The IP public address system network audio Pre-Amplifier with decoder is the main equipment of the IP network PA system. It is built-in decoder which can decode the network audio signal into analog to feed in analog amplifier.

The IP public address (PA) system key equipment to set up the IP PA sound system, it is convenient to set up sound over network system as one IP decoder, moreover it is also very useful to upgrade the traditional public address system into digital IP public address system by only add this IP network audio adapter and keep the existing PA system amplifier and loudspeakers.


Feature:

  • The IP network audio adapter with decoder is the head of IP PA system.
  • The IP network audio adapter with decoder can work with universal PA 100 volt amplifier and speakers.
  • It is high capacity but cost-effective multiple room network sound system.
  • The system could be set up over existing network, non dedicated network is needed.
  • System capacity of 300 adapters online simultaneously.
  • Capacity of control power amplifier 1000W.
  • Support LAN/WAN and Internet network.
  • Network data delay of less than 100 milliseconds.
  • Program controllable power supply of AC 230V or 110V.


Specification:

Model

IP-600NA

Description

IP Network Audio Pre-Amplifier

Power Supply

AC230V or 110V

Power Consumption

5W

Network Protocol

TCP, UDP, ARP, ICMP, IGMP

Network Speed

10/100Mbps

Audio Format

Mp2, Mp3, PCM, ADPCM

Audio Sampling

8KHz-44.1KHz, 16 bits, 8K-320Kbps

S/N Ratio

≥90dB

Frequency Response

20Hz-20KHz

Data Delay

100 milliseconds

Connector

one aux output

Dimensions

483×256×44mm

Weight

3.2kg