Contact Us
  • Web: www.cmxaudio.com
  • E-mail: info@cmxaudio.com
  • Tel: +0086-20-39125019
  • Skype: publicaddress
  • Address: 302RM 3#, Honghui Industrial Zone, Zhongyuan RD, Shibi Area, Panyu, Guangzhou, China 511497

Full Digital Networked DSP Processor

no data

Full Digital Networked DSP Processor

VE-DSP200T

 

 

Features:

This processor control all the units in the chain, and supply power to all. You can configure it by the button on front panel with screen information.


On front panel, the processor unit contains:

l   Power Switch- Power on or off the processor unit

l   Display- Show the current status or the result of your operation, menu list etc.

l   Operate Buttons- 4-direction buttons for menu operation, confirm and exit

l   Audio Recording- Press to start/stop recording the audio of whole conference content

l   USB Slot- To insert USB disk (Up to 32G) for recording, with status light indicator which is flashing during the recording.

l   Headphone Socket- Headphone connection

l   Knob- Control volume level of the system

l   On rear panel, the processor unit contains:

l   Audio Inputs(IN 1)- RCA audio input from external audio sources like MP3

l   Audio Inputs(IN 2)- XLR audio input from external audio sources like Microphone and remote audio input

l   Audio Outputs(OUT 1)- RCA audio output to external audio devices like PA system, loudspeakers etc and can be set as zone output.

l   Audio Outputs- XLR audio output to external audio devices like PA system, loudspeakers etc. and can be set as zone output.

l   Audio Outputs(OUT3,OUT4,OUT5,OUT6,OUT7,OUT8)- Phoenix audio output.OUT3,OUT4 can be set as zone output. OUT4 also can be set as echo cancellation remote audio output. OUT5,OUT6,OUT7,OUT8 is corresponding to the interpretation CH 1, CH2,CH3,CH4.

l   Audio Link-Extend to the next processor for conference room combination and audio exchange.

l   CU/DU-Connect to the delegate unit, chairman unit and interpreter unit. The chain 1 and chain 2 or chain 2 and chain 3 can be the closed loop.AP- connect to 2.4GHz/5GHz Professional Conference Access PointVE-WAP

l   Control-Female DP9 connector is used to connect with camera auto-tracking processor or control system

l   Control-Male DP9 connector is used to connect with the camera chains.

l   Keyboard-Connect to the camera control keyboard

l   Enthernet-Connect to PC or switch for the software control

l   Ground screw-Connect the processor unit to the ground

l   Power inlet-Connect the processor unit to the main power supply with a power cable.

Front & Rear Panel:

VE-DSP200T REAR.jpg

 

 

 

 

 

 

 

 

 

 

Extension Main Unit VE-HUB

The extension main unit is used to extend the system to connect more delegate/chairman units.

HUB-1.png

Figure 2.3 Front and side view of VE-HUB

 

ü   Loop Through Chains-Connect with processor unit/last extension unit and next extension unit.

ü   Repeated Chains-Provide 4 channels for delegate/chairman units.

ü   Power indicator--Indicate status of the power inlet connection.

ü   Power inlet-- Connect the extension unit with power cable.

 

Splitter Box VE-HUB

Figure 2.4 Front, rear and top view of VE-HUB

 

ü    Repeated Chains -- spilt two chains for delegate/chairman units

ü    Loop Through Chains --connect to the processor unit, extension unit or loop to next connection box

 

 

Model

Extension cable
  (m)

VE-DSP200T

VE-HUB

Port 1

Port

2

Port 3

Max. total

Port 1

Port

2

Port 3

Port 4

Max.

total

 VE-201
 
VE-202           VE-203              VE-204           VE-205            VE-206

0m

30

30

30

90

30

30

30

30

120

05m

30

30

30

90

30

30

30

30

120

10m

28

28

28

84

28

28

28

28

112

20m

24

24

24

72

24

24

24

24

96

50m

20

20

20

60

20

20

20

20

80

100m

10

10

10

30

10

10

10

10

40

 


Copyright © 2013-2016 Guangzhou CMX Audio Co., Ltd All Rights Reserved Design:Tiandixin