Contact Us
  • Web: www.cmxaudio.com
  • E-mail: info@cmxaudio.com
  • Tel: +0086-20-39125019
  • Skype: publicaddress
  • Address: 302RM 3#, Honghui Industrial Zone, Zhongyuan RD, Shibi Area, Panyu, Guangzhou, China 511497
Home  >  Products  >    >  IP Intercom System  >  

IP Intercom System 16 Zone Door Station IP-9000K

no data

IP Intercom System Zone Door Station                       

IP-9000K                                                              

IP Intercom System 16 Zone Controller

IP-9000AK

Feature:

IP-9000AK is the network adapter with 16 zone capacity to link total 16 pcs IP-9000K, thus the system cost is minimum for multiple room solution.

The IP-9000AK is built-in 20W low impedance amplifier for external speaker power.

The IP-9000AK is with closed contact input and output for door access system control.

Ideal solution for prison, hospital, hotel, military, factory, train station and airport.

Mini compact intercom panel with minimum size of 6mm aluminum material.

Economy range IP intercom panel at effective cost.

Both surface or embedded mounting ways with supplied mounting box.

Intercom panel built-in speaker, microphone.

PPT and call two types full duplex two way communication system.

It can start the communication to the call station by pressing the call button, the call station will be reminded with ring call and indicator as which intercom panel from where is calling. The call will be automatically transferred to next call station once busy, no answer or fault occurred.

With one contact output and contact input for third party communication.

Built-in SD card, the inside voice message could be triggered by network or contact input.

Non dedicated network is needed, and the system could be easily built-up over exiting LAN/WAN network.

Embedded server Lynux technology with two ARM and DSP high speech chip.

The IP-9000K Intercom panel support surface mount and in-wall installation.

Network data delay of less than 100 milliseconds.

Built-in SD card for remote program broadcast and recording use.

It is powered by DC12V, the power adapter is included.


Specification:

Model

IP-9000AK & IP-9000K

Description

IP Network Intercom System

Mounting

Support both surface or embedded by supplied mounting box

Power Supply

DC 12V

Power Consumption

23W

Network Protocol

TCP, UDP, ARP, ICMP, IGMP

Network Speed

10/100Mbps

Audio Sampling

8KHz-44.1KHz, 16 bits

Transmission Rate

8Kbps to 320Kbps

S/N Ratio

≥90dB

Frequency Response

20Hz-20KHz

Data Delay

100 milliseconds

Connector

One line output & one RJ45 port for LAN, two contact inputs and two contact outputs, one SD input.

Dimensions

211(W)×155(D)×45(H)mm for IP-9000AK

111(W)×162(D)×41(H)mm for IP-9000K



Copyright © 2013-2016 Guangzhou CMX Audio Co., Ltd All Rights Reserved Design:Tiandixin